ZXO Engineering Notes

GB10 enclosure design and airflow plan for R01

R01 is the first exterior CAD revision for a compact ZXO desktop AI enclosure. The design establishes a 220 × 220 mm footprint and a height of 110 mm, with a recessed lower intake area and a slotted top grille. The next step is to fit a specific GB10 platform and test the cooling design on a physical prototype.

Exploded GB10 thermal concept showing the lower intake, internal heat sink and proposed top exhaust fan
Illustration of the proposed cooling layout.

What the exterior CAD defines

The model defines the outer shell, top grille, base and blank rear I/O panel. The grille has 12 slots. The vertical grooves on the sidewalls are part of the exterior finish. The recessed area above the base reserves space for the lower intake.

The rear panel remains blank until we confirm the board and its port positions. Internal mounts, assembly clearances and production tolerances also depend on the selected platform. The enclosure is at the exterior design stage.

How the proposed air path works

The plan routes room air in near the base, through a removable filter and a duct around the heat sink, and out through the top grille. The cooling concept pairs a heat sink and vapor chamber with a proposed 140 mm top exhaust fan. The duct would help direct air through the heat sink, while the filter would need to remain accessible for cleaning.

The desktop placement matters at both ends. A soft surface can restrict the lower intake, and a shelf above the chassis can restrict exhaust. The grille and filter also add resistance, so we would evaluate them together with the selected fan and heat sink. See the illustrated GB10 cooling concept.

What we plan to check on a prototype

  1. Confirm the board, cooler, and cable routing fit the chassis, with access to the ports and intake filter.
  2. Compare temperatures and fan speed during idle and sustained inference, recording ambient temperature, workload and chassis clearances for each run.
  3. Check whether the grille, filter and desktop placement affect cooling or noise, including whether warm exhaust recirculates toward the intake.

Temperatures, airflow, noise and sustained-load performance are still unmeasured for this ZXO enclosure.

Platform reference

NVIDIA’s DGX Spark is a reference for the GB10 Grace Blackwell platform. ZXO’s enclosure layout and cooling plan are separate engineering work, with OEM board fit and component selection still open. NVIDIA DGX Spark specifications.

Explore the ZXO GB10 platform evaluation · Explore the ZXO Local AI Pilot